Skip to product information
  • Sku: POA4300870
  • Vendor: Banggood Dropship

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro V3.0 Flight Controller AIO 10A ESC CineWhoop FPV Racing Drone PNP BNF w/ 1102 9000KV Motor Runcam Splite3 Lite Camera

€174,65 EUR
 per 
Tax included.
In stock!
Spend €100,00 to FREE SHIPPING

Short content about your product.

Short content about your product.

Icons are optional

USE RICH TEXT EDITOR
And big icons to highlight the product sale point

Receiver

Product description

Notice: Because the MPU6000 is out of production, the flight controller and related Drone will gradually be replaced by ICM20689 or BMI270.


Upgrade Version:
1. Motors are upgraded to 9000KV Version.
2. Removed the Microphone and it was packed separately in the pacakge.
3. Heighten the frame 

   07.29.2020 Beijing Time

4. The Mobula7 HD Comes with new V30 FC & Runcam Split3-lite FPV Camera after Jan. 21th, 2021.


Specification: 
Brand Name: Happymodel
Model: Mobula7 HD
Item Name: 75mm Wheelbase 2-3S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Receiver ( Optional): Compatible Frsky NON-EU Receiver
                                  Compatible Flysky Receiver
                                  Compatible DSM2/DSMX Receiver
                                  Without Receiver

Size: 98mm*98mm*45mm
Weight: 48g (without battery)
             72g ( with battery )

Crazybee F4 PRO V3.0 Flight Controller 


MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689 or BMI270 (SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)

Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection


Firmware

(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX

Onboard 10A BL_S 4In1 ESC
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_5.HEX
Default protocol: DSHOT600
Onboard Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Onboard Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support

External DSM2/ X receiver version

Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Without Receiver Version

- No receiver, need add by yourself.

support external serial-bus receiver like xm , TBS CRSF, S-FHSS etc

EX1102 9000KV Motor
Mode: EX1102 KV9000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):1S-3S
Propeller 40mm 4-blade Propeller ( 4 CW 4 CCW)
 Color: Send Randomly
5.8G 40CH 25-200mW VTX
Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Weight: 3g
Smartaudio ready , change VTX bands, powers, channels via OSD
Runcam Splite3 Lite Camera
 

Brand Name: Runcam

Model: Split3-Lite

Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
Video File Format: MOV
Image Resolution:2 MP
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
Hole Distance of Installation: 25.5*25.5mm
PCB Size: 29*29mm
Lens Module Size: 14*14mm
Lens Specs: M9
Power Input: DC 5-20V(Non-direct power supply from battery.

Powered directly with battery will generate surges and burn the camera.)
Working Current: 450mA @5V

Lipo Battery
Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 23g
Connector: XT30

Features:

New Crazybee F4 PRO V3.0 FC AIO 12A 2-3S ESC
2S for indoor Cine whoop mode
3S for outdoor Freestyle whoop mode

The lightest 1102 brushless motor only 2.7g with double ball bearings
Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Runcam Split3-lite  1080p 60fps DVR ready
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Full telemetry function ready (Frsky Non-EU and Flysky version support)
Special Breath light ready


Package Included:
1x Mobula7 HD 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW, color send randomly)
1x 3S 11.4v 300mAh 30C/60C battery
1x Propeller Disassemble Tool
1x Screwdriver
 
 

Collapsible row

Add an additional description to your products. You may set the same content for all products.

Ex: Shipping and return policies, size guides, and other common questions.

Or you may link a dynamic source to show product fields like vendor or custom product meta fields.

Ex: Ingredients, nutritional info, additional features and other unique per-product data.

Additional features

Add product sale point
Add product sale point
View full details

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro V3.0 Flight Controller AIO 10A ESC CineWhoop FPV Racing Drone PNP BNF w/ 1102 9000KV Motor Runcam Splite3 Lite Camera

SUBHEADING

Recently viewed products

YOUR SUBHEADING GOES HERE

Icon banners

Free delivery

Short content about your store

Top-notch support

Short content about your store

Satisfied or refunded

Short content about your store